RV Water Heater Anode Rod and Flush Wand Set, Magnesium Rod for Suburban, 360° Rotating Rinser, Corrosion Protection

RV Hot Water Heater Replacement Parts Kit for corrosion protection and tank cleaning This kit contains the parts needed to maintain and clean RV and household water heater tanks. Magnesium anode rods reduce tank corrosion and mineral buildup, while the stainless steel flush wand removes sediment and scale. All parts are sized for common RV water heater fittings and include the tools and tape needed for installation. Key benefits Protects tank from corrosion and mineral buildup by using replaceable magnesium anode rods that attract contaminants through electrolysis. Reduces water heater odor caused by tank contamination. Restores hot water performance by removing sediment and scale with a targeted flush wand. DIY friendly: includes a hex socket for anode removal and PTFE tape to help prevent leaks during maintenance. What is included 2 magnesium anode rods, 91/4 inches long with 3/4 inch NPT threaded connections 1 RV water heater flush wand with a curved stainless steel tip and 35 cm 13.7 inch elongated metal rod 1 double hex wrench socket removal tool sized for 3/4 inch NPT anode nuts 1 roll PTFE tape Flush wand adapters: 1/2 inch quick connect and 3/4 inch garden hose adapter Compatibility Fits many RV water heater tanks and most Suburban RV water heaters Compatibility examples include Atwood household water heaters, Suburban water heater model 232767, and MoreFlo water heater tanks Flush wand features and performance Curved stainless steel tip reaches into the tank and dislodges sediment from hardtoreach areas Detachable nozzle with three spray modes and 360 degree rotation to change the water column for different cleaning needs Adjustable nozzle pattern delivers both a concentrated jet and a wider spray for thorough tank flushing Can connect to a garden hose or quick connect supply for flexible use Anode rod function and maintenance Magnesium anode rods sacrifice themselves preferentially to capture corrosive elements, slowing tank corrosion and helping prevent odor and scale Recommended to check and anode rods regularly to maximize tank life Anode rods use standard 3/4 inch NPT threads and are compatible with most RV and camper water heater fittings Simple maintenance steps 1. Turn off the water heater and isolate the water supply before starting. 2. Use the included hex socket to remove the existing anode rod. 3. Insert the flush wand through the anode opening, secure connections with PTFE tape wrapped around the flush wand rotation interface and the anode rod nut to reduce leakage, and flush the tank until sediment clears. 4. Install the anode rod and tighten with the hex socket. Use scenarios Routine RV maintenance: remove mineral buildup and anode rods during annual water heater service on a travel trailer or motorhome. Seasonal cleaning: flush the water heater tank before winter storage or after extended travel to remove sediment and restore heating efficiency. Multipurpose cleaning: use the wand as a generalpurpose hose attachment for washing vehicles, rinsing air conditioner components, or cleaning tight areas around the campsite. Specifications Anode material: magnesium Anode length: 91/4 inches Anode connection: 3/4 inch NPT Flush wand rod length: 35 cm 13.7 inches Adapters: 1/2 inch quick connect and 3/4 inch garden hose Notes and recommendations Always turn off the water heater and relieve pressure before performing any maintenance. Wrap PTFE tape around threaded connections as shown in the product instructions to help prevent leaks and backflow of wastewater. Keep replacement anodes on hand and inspect the anode condition annually or according to water quality and usage. This kit provides the essential replacement anode rods, a targeted flush wand, installation tool, and PTFE tape to maintain water heater performance, reduce odors, and help extend the service life of RV and household water heater tanks.