Flexible French Drain Pipe 2 Inch Green Non Woven Landscape Drainage Pipe with Permeable Filter Layer

Color: Green Size: Diameter 2 in (5 cm) Length 33 m (108.3 ft) Overview This flexible soft infiltration drain pipe is designed to manage excess groundwater by allowing water to seep into surrounding soil and carry overflow away from vulnerable areas. The pipe combines filtration, permeability, and structural support to lower the water table and reduce surface pooling and erosion. Key benefits Controls standing water and reduces muddy areas by improving subsurface drainage. Filtration layer prevents sediment from entering the pipe while allowing water to pass . Flexible design bends around obstacles so elbows are usually not required. Built to be buried and remain durable under soil or gravel cover when fixed in place. Specifications Material: nonwoven filter layer, polyester fiber, and steel wire Diameter: 2 in (5 cm) Length: 33 m (108.3 ft) per roll Color: Green Package contents: 1 x soft French drain pipe Features and performance Effective groundwater management: Lowers local water table and reduces surface saturation in yards, lawns, and landscape beds. Permeable design: Outer nonwoven layer and polyester fiber provide filtration and allaround water permeability while preventing clogging by larger particles. Reinforced structure: Builtin steel wire gives strength to withstand soil cover and maintain shape over time. Flexible routing: Bends easily around roots, corners, and landscaping features, allowing continuous runs without frequent fittings. Extendable: Pipes can be connected end to end for greater length or joined to PVC piping for routing (PVC pipe not included). Because the system is designed to collect and distribute water through its permeable surface, minor seepage at connections is normal. Typical applications Residential French drain around foundations, under downspouts, or along flower beds to prevent water accumulation and erosion. Retaining wall drainage: Vertical and horizontal runs on the dry side of retaining walls to relieve hydrostatic pressure. Roadside, shoulder, and soft ground drainage for smallscale landscape or construction uses where soil filtration is needed. Installation notes and reminders Pipes can be rolled into the trench without immediate soil or gravel backfill, but fixing them in place and covering with soil or gravel will make the installation stable. Mark the installation route before digging. After installation, avoid driving vehicles or allowing livestock over the buried pipe. Connections are intended to be permeable; minor seepage at joints is expected and part of how the system works. Color and minor measurement differences may occur due to lighting and manual measurement. Use cases 1) Yard and garden: Install along the low side of a lawn or behind a flower bed to collect seepage and distribute it into adjacent soil rather than allowing surface runoff to pool. 2) Retaining wall: Place horizontally at the base of a retaining wall or vertically along drains to relieve water pressure and reduce wall saturation. 3) Small construction and road projects: Use under shoulders, walkways, or soft ground areas to improve subsurface drainage where filtration and debris exclusion are required. This drain pipe offers a practical, durable option for subsurface water management where filtered infiltration and flexible routing are needed.