1.5mm Full cone Spray Nozzle - for Waste Oil, Air Atomizing Fuel Nozzle_HP

1. The use of compressed air to swirl inside the tubes and mix the atomized droplets. 2. Can produce fine mist particles at low pressure and low volume conditions. 3. Allows control of air flow and pressure to adjust spray flow, angle, and particle size. 4. The large fluid passage provides good anti-clogging performance. 5. Performs well in atomizing high viscosity liquids such as heavy oil and waste oil. Fuel nozzle, siphon air atomizing nozzle, two-fluid nozzle For crude oil, heavy oil, waste oil, alcohol-based fuel burners Oil inlet: 1/8 inch Air inlet: 1/4 inch Nozzle size: 9/16 inch 1.5mm diameter, liquid water flow rate: 11L/H Product Introduction Siphon air atomizing nozzle is a highly effective low-pressure nozzle intended for atomization. Widely used for heavy oil, waste oil, animal and vegetable oils, and alcohol-based fuel burner systems. Suitable for kerosene and oil atomization. Product Features Application Commonly used in heavy oil, waste oil, animal and vegetable oils, alcohol-based fuel systems, combustion spray systems, spray workshops, humidification cooling systems, mechanical cleaning, dust removal, and various industrial spray applications. Colour: Silver + gold Material: Metal Size: Connector diameter: 8mm, hole diameter: 1.5mm, length approximately 10cm Package Contents 1 x Fuel nozzle Only the above content included; other items are not included. Note: Lighting and display settings may cause slight color differences between the image and the actual item. A measurement error of +/- 1-3cm is acceptable.