Power Inverter 12V 24V to 110V 240V Car Power Converter with Smart LCD Display and Multi Protection

Compact DC to AC Power Inverter for Vehicle and Battery Use Convert 12V or 24V DC to 110V or 220V AC power with a durable, portable inverter available in multiple power ratings. Designed for mobile power needs, this inverter provides reliable modified sine wave output with builtin protections and active cooling. Key benefits Provides AC power from a vehicle or battery for tools, electronics, and small appliances when mains power is not available. Builtin protections and thermal management reduce the risk of damage to the inverter and connected equipment. Two input options let you power devices while driving or connect directly to a battery at a campsite, job site, or during power outages. Features Input and output compatibility: Works with 12V or 24V DC input and outputs 110V or 220V AC. Inverter voltage must match the battery voltage to operate correctly. Power options: Continuous power available in 750W, 1000W, 1300W, and 1500W models with corresponding peak power ratings of 1500W, 2000W, 2600W, and 3000W. Modified sine wave output suitable for many household electronics and tools. Conversion efficiency around 90 percent. Output frequency selectable 50 Hz or 60 Hz. Durable aluminum housing for improved protection and heat dissipation. Builtin temperature controlled cooling fan for quieter, controlled cooling. Isolated ground neutral and rugged construction for use in demanding environments. Large LCD display shows battery voltage, output voltage, battery capacity, and output load so you can monitor status at a glance. Multiprotection system includes reverse polarity protection, overvoltage and undervoltage protection, overcurrent protection, temperature control, short circuit protection, and surge protection. Important usage guidance Match inverter voltage to battery voltage: use a 12V inverter with a 12V battery or a 24V inverter with a 24V battery. Do not overload with inductive loads such as motors, water pumps, and air conditioners without accounting for startup current. For inductive loads, multiply the rated power by at least three and ensure the result does not exceed the inverter continuous power. If output power is higher than 150W, connect the inverter to the battery using the supplied crocodile clips for a secure, lowresistance connection. Two input methods: plug into a vehicle cigarette lighter when driving or connect directly to a 12V or 24V battery with the included battery clips. Specifications Continuous power: 750W, 1000W, 1300W, 1500W Peak power: 1500W, 2000W, 2600W, 3000W Input voltage: 12V or 24V DC Output voltage: 110V or 220V AC Output waveform: Modified sine wave Conversion efficiency: approximately 90 percent Output frequency: 50 Hz or 60 Hz Product sizes: 220 x 112 x 60 mm (model dependent) 240 x 110 x 60 mm 260 x 112 x 60 mm 275 x 120 x 70 mm Net weight: 0.55 kg, 0.75 kg, 0.9 kg, 1.35 kg (model dependent) Package contents 1 Power inverter 1 Pair battery clips (crocodile clips) 1 Cigarette lighter plug Practical use scenarios Road trips and camping: Power small kitchen appliances, chargers, lighting, and entertainment equipment from your vehicle or a leisure battery. Mobile worksite: Run power tools, battery chargers, and diagnostic equipment where mains power is not available. Account for motor startup currents when using inductive tools. Emergency backup: Provide temporary power to essential devices during a power outage by connecting the inverter to a vehicle battery or a dedicated deep cycle battery. Safety reminder Always confirm battery and inverter voltages match before connecting. Avoid exceeding continuous and peak power ratings and follow the guidance for inductive loads to prevent damage.