10FT Natural Gas Hose with Quick Connect, Low Pressure LPG Hose and Control Valve for Grill, Fire Pit, Pizza Oven and BBQ

10 FT Natural Gas Hose, Quick Connect, and Gas Control Valve Assembly Overview A readytoinstall set for low pressure natural gas or propane applications. Includes a 10 foot natural gas hose with quick disconnect, a 3/8 inch quick connect fitting, and a gas control valve assembly. Designed for short distance connections from a fixed gas source to gas appliances. Key benefits Simple connection and disconnection: quick disconnect plug makes it easy to attach or remove an appliance without tools. Suitable for low pressure systems: components rated for 1/2 PSI (approx 65 mbar) for typical natural gas and propane household applications. Delivers sufficient flow for many midrange appliances: hose supports up to 38,000 BTU per hour over short runs; valve supports up to 58,000 BTU maximum. Clear compatibility: standard 3/8 inch and 5/818 UNF flare fittings make the set compatible with common appliance and line fittings. Flexible placement: 10 foot hose gives reach while allowing for appliance movement during use. What is included and how it functions 10 foot natural gas hose: 3/8 inch female flare at one end and 3/8 inch male quick disconnect plug at the other end. Intended to supply gas to a 38,000 BTU per hour appliance over short distances from a fixed gas source. Measure actual distance between appliance and gas source and allow room to move the appliance before . Natural gas quick connect: 3/8 inch female pipe thread x 3/8 inch female flare quick connect disconnect. Rated for 1/2 PSI. For low pressure propane or natural gas systems. Gas control valve assembly: 1/2 PSI 65 mbar gas control valve with 5/818 UNF male flare inlet connector. Intended for use with kitchen appliances that include both oven and stovetop functions. Maximum BTU rating 58,000. Flame control range: OFF at 0 degrees, Minimum at 90 degrees, Maximum at 180 degrees. Specifications Hose length: 10 feet Hose fittings: 3/8 inch female flare x 3/8 inch male quick disconnect plug Hose flow capacity: up to 38,000 BTU per hour for short runs Quick connect: 3/8 inch female pipe thread x 3/8 inch female flare; 1/2 PSI rating Valve inlet connector: 5/818 UNF male gas flare Valve pressure rating: 1/2 PSI (approx 65 mbar) Valve maximum output: 58,000 BTU Valve flame control: OFF (0 degrees) to Minimum (90 degrees) to Maximum (180 degrees) Use scenarios Outdoor gas firepit or firebowl: Convert and connect a firebowl to a fixed natural gas supply using the 10 foot hose and quick disconnect for easy removal when storing or servicing the unit. Portable or fixed gas grill within short distance of a natural gas line: Use the quick connect hose to supply gas and permit quick detachment for cleaning or repositioning. Kitchen range replacement or : or install the gas control valve on a range that has both oven and stovetop functions, using the specified 5/818 UNF flare inlet and 1/2 PSI low pressure rating. Installation and compatibility notes Confirm that your appliance uses 3/8 inch flare fittings and that the valve inlet accepts 5/818 UNF male flare fittings where applicable. Measure the distance from the gas source to the appliance, and allow extra length for moving the appliance during use before . The hose is intended for short runs; extended distances may reduce flow. Designed for low pressure natural gas or propane systems at 1/2 PSI (approx 65 mbar). Do not exceed specified pressure or BTU ratings. Safety and use Use only with compatible low pressure natural gas or propane appliances. Follow local codes and professional guidance for installation and leak testing.