1/2-inch side-inlet float valve, automatic water level control valve, compatible with aquaculture, swimming pools, and

38.95 CHF
Livraison gratuite

1/2-inch side-inlet float valve, automatic water level control valve, compatible with aquaculture, swimming pools, and

Vendu par:

38.95 CHF

Économisez 15.05 CHF (27%)

Prix de vente recommandé

54.00 CHF
En stock
Livraison gratuite

Retours sous 14 jours

Modes de paiement:

  • Marque: Unbranded

Détails du produit

Détails du produit

1/2-inch side-inlet float valve, automatic water level control valve, compatible with aquaculture, swimming pools, and

This valve can replace traditional float valves and is compatible with various high-level water tanks, pools, and towers in industrial and civil buildings. It features automatic control, automatic water replenishment at low water levels, and automatic stop when full. It has four inlets for large water output. It boasts an attractive appearance, compact size, practicality, and easy installation. It requires no electricity, is easy to use, has a long service life, low failure rate, and saves water resources. Its working pressure range is 1-10KG (0-1-1MPa). It is compatible with clean water. It is compatible with media temperatures ≤70℃. It is resistant to high-temperature media temperatures up to 70℃. 120℃\r\n\r\nWhen the water level in the pool or tank drops, the valve body sinks, and the valve control valve's pre-valve core opens. Affected by the pipeline water pressure, the valve control valve's sealing surface will... After opening, water will flow out, and vice versa.\r\n\r\nNote\r\nThis product is a level control valve. During installation, the float must be vertical. If top installation is required, an elbow is needed to connect the valve float and the inlet pipe. First, the inlet pipe should be fixed on a horizontal surface. Then, according to the standard, connect the automatic water level control valve to the inlet. The inner diameter of the main inlet should match the control valve's standard. When using valves with the same diameter, the ball head should be fully open. If two valves are installed in the same pool, they should be kept on the same horizontal plane. Before installation, please remove impurities from the pipes to prevent blockage. If the water quality is poor, the valve needs proper maintenance. If the user finds that the water filling time is too long, simply add water and clean the inlet. Material: Nylon PA66 + food-grade rubber. Dimensions: 72x50x70mm. Quantity: 1 piece. Note: Please allow 1-3mm error due to manual measurement. Please ensure you do not mind before bidding. Due to differences in monitors, the picture may not reflect the actual color of the item. Thank you. Package Contents: 1 x Valve Level Controller
  • Identifiant Fruugo: 542577265-1098212693
Sécurité

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Select the appropriate model based on specifications.

Livraison

Livraison

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre jeu. 12 novembre 2026–lun. 23 novembre 2026 - GRATUIT

Expédié depuis le Chine.

Retours

Retours

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et conformément à votre commande. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et obtenir le remboursement intégral des articles retournés.

Consulter la politique de retour complète