Automatic water level control for tank float valve towers

38.95 CHF
la livraison GRATUITE

Automatic water level control for tank float valve towers

Vendu par:

38.95 CHF

Économisez 15.05 CHF (27%)

Prix de vente recommandé

54.00 CHF
En stock
la livraison GRATUITE

Politique de retour sur 14 jours

Modes de paiement:

  • Marque: Unbranded

Détails du produit

Détails du produit

Automatic water level control for tank float valve towers

This check valve can replace traditional float valves and is compatible with various high-level water tanks, pools, and towers in industrial and civil buildings. It automatically controls water flow, replenishes at low levels, and automatically stops when full. It has four inlets for large water output, a beautiful appearance, a compact size, and is practical and convenient to install. It requires no electricity, is easy to use, has a long service life, a low failure rate, and saves water resources. Operating pressure range: 1-10KG (0-1-1MPa). Compatible media: clean water; compatible media temperature: 70℃; high-temperature resistant media temperature: 70℃-120℃. When the water level in the pool or check valve drops, the check valve body sinks and the check valve control valve core opens. When the water pressure in the pipeline changes, the sealing surface of the control valve will open and water will flow out, and vice versa. Note that this product is a level control valve. When installing, the float must be vertical. If it needs to be installed from the top, an elbow is required to connect the valve float and the inlet pipe. First, the inlet pipe should be fixed on a horizontal surface. Then, connect the automatic water level control valve to the inlet according to the standard. The inner diameter of the main inlet should be the same as the normal diameter of the control valve. When in use, the valve's shut-off valve should be fully open. If two valves are installed in the same pool, the two valves should be kept on the same horizontal surface. Before installation, please clean the impurities in the pipe to avoid blockage. If the water quality is poor, the valve needs to be properly maintained. If the user finds that the water filling time is too long, simply flush the inlet. Material: Nylon PA66 + food-grade rubber. Size: 72x50x70mm. Quantity: 1 piece. Note: Please allow an error of 1-3mm due to manual measurement. Please ensure that you do not mind before bidding. Due to differences in different monitors, the picture may not reflect the actual color of the item. Thank you. Package contents: 1 x Water level control valve
  • Identifiant Fruugo: 544793497-1101311396
Sécurité

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Select the appropriate model based on specifications.

Livraison

Livraison

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre jeu. 29 octobre 2026–lun. 09 novembre 2026 - GRATUIT

Expédition de Chine.

Retours

Retours

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles.

Voir l'intégralité de la politique de retour