Anti-skid Switch Compatible with Cruiser Mud Escape Wheel Anti-skid System Off-road Modification

After turning off the ESP, it is normal to display the fault light on the instrument panel. If the ESP is not turned off, the fault light will disappear (no need to turn off the engine and restart the car) Turn off ESP for snow climbing and skidding, turn off ESP with one button, freely switch the anti-skidding tool When driving in a snowy day, most of my friends may have encountered a more interesting but somewhat helpless scene: a small slope that must be walked home every day, you may not feel its existence when you pass through, but you have been down. After the snow, it is very different. No matter how you give the gas, you will only hear the sound of tires scratching the ground, but the car can't climb this small slope. In this case, don't be at a loss. You only need to turn off the ESP system on the car, and your car will basically climb smoothly. Details Product name: ESP close switch Applicable models: For Cruiser 2007~2020 Specification: 1 set Function: non- Installation: no drilling required The principle of turning off the EPS: This is because the wheel's adhesion on icy and snowy roads will be very low. When climbing a hill, the wheel will spin due to the low adhesion. When the ESP system detects that the wheel is spinning, it will apply brakes to the idling wheel. At the same time, the ESP system will also reduce the torque output of the engine. At this time, no matter how you step on the accelerator, the ESP system will always compete with you and make the vehicle stuck in place. When your ESP system is turned off, the torque output of the engine will no longer be restricted, and the vehicle will get enough power. Material: ABS colour: black Package Contents: 1 Set x ESP Anti-Skid Switch Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.