Pure Sine Wave Power Inverter 3000W 48V to 220V DC to AC for Car RV Solar Home Camping

Pure Sine Wave Inverter 3000W / 4000W / 5000W Overview A pure sine wave DC to AC inverter designed for reliable power conversion in mobile, off grid, and backup applications. Provides clean AC output suitable for sensitive electronics, household appliances, and power tools. Available in three models with multiple input and output voltage options and universal AC socket. Key benefits Clean, reliable AC output: Pure sine wave output reduces noise, heat, and interference for sensitive electronics and motors. Flexible input and output: Supports 12V, 24V, 48V, and 60V DC inputs and selectable AC outputs of 110, 120, 127, 220, 230, or 240 volts at 50Hz or 60Hz. Portable and compact: Small footprint and modest weight make it easy to install in vehicles, boats, or portable power setups. Built in protection: Automatic overvoltage and undervoltage protection for safe battery and inverter operation. Main features and specifications Type: Pure sine wave inverter Output waveform: Pure sine wave Models: 3000W, 4000W, 5000W (model naming references peak power capability) Continuous output power: 3000W model 1500W continuous; 4000W model 2000W continuous; 5000W model 2500W continuous Peak power: 3000W, 4000W, 5000W respectively Input voltage: 12V, 24V, 48V, 60V DC Output voltage options: 110V, 120V, 127V, 220V, 230V, 240V AC Output frequency: 50Hz or 60Hz selectable Socket: Universal AC socket for broad plug compatibility Pure inductive load capacity: 95 percent Physical sizes and package weights: 3000W: 26 x 15 x 7 cm, package weight 2.4 kg 4000W: 30 x 15 x 7 cm, package weight 2.8 kg 5000W: 34 x 15 x 7 cm, package weight 3.2 kg Protection and important usage notes Automatic and low voltage protection: For 12V input: inverter will disconnect if input voltage falls below 10.5V or rises above 15V. For 24V input: inverter will disconnect if input voltage falls below 20V or rises above 30V. Do not connect the inverter to the mains power grid. The inverter is not designed for grid tie and must not be connected to utility AC supply. Both AC output conductors are live; do not use either AC output conductor as a grounding conductor. Do not place residual current devices or circuit breakers between the inverter and the load. Adding such devices between inverter and load can cause malfunction and may damage the inverter. Cigarette lighter connection limits: When using the vehicle cigarette lighter socket, do not exceed 300W on 12V car sockets or 400W on 24V truck sockets. If higher power is required, connect directly to the battery with appropriate cables and fusing. Exceeding the socket limit may blow vehicle fuses. Battery cable and extension guidance: Long battery cable runs increase voltage drop and heating. If cable length is extended, increase conductor diameter accordingly. Use heavy gauge battery cables for the inverter battery connection and avoid using thin wires to extend the battery output. Proper cable sizing preserves conversion efficiency and prevents excessive heat. Package contents 1 x Pure sine wave inverter (selected model) 1 x English user manual 1 x Certificate of compliance 1 x Thick battery cable 1 x Battery clip Typical applications Mobile power in vehicles and trucks: Run laptops, small appliances, power tools, and chargers on the road, observing cigarette lighter limits or using direct battery connection for higher loads. Off grid and backup power: Provide AC power for lighting, communications equipment, and small household appliances during power outages when paired with an appropriate battery bank. Remote job sites and outdoor events: Power audio equipment, portable refrigerators, and power tools where grid power is not available. Installation and compatibility tips Confirm input voltage matches vehicle or battery bank (12V, 24V, 48V, or 60V) before connecting. Select the required AC output voltage and frequency to match your devices. Use the universal socket for broad device compatibility. Use appropriate fuses or circuit protection on the battery side near the battery. Follow recommended cable gauge for the chosen model and distance. Avoid connecting the inverter to utility mains. Ensure proper ventilation and secure mounting. This inverter family provides a compact, flexible pure sine wave solution for portable and off grid power needs. Follow the protection and installation guidance to ensure safe, reliable operation.