Cartridge Heater 10x300mm 950W 380V Single Ended 304 Stainless Steel Heating Element

Cartridge Heater Set for Industrial Heating Applications This set contains two single-ended cartridge heaters, each measuring 10mm in diameter and 300mm in length, with a power output of 950W and a voltage rating of 380V AC. The heating elements are housed in a 304 stainless steel sheath, providing good corrosion resistance and durability for demanding industrial environments. The integrated lead wire measures 30cm, offering flexibility during installation. Construction and Materials Each heater is built with a 304 stainless steel outer tube, which protects the internal resistance wire while allowing efficient heat transfer to the surrounding medium. The single-ended design concentrates the heating zone at one end, making these cartridges suitable for insertion into drilled holes in metal blocks, platens, dies and similar tooling. The 10mm diameter and 300mm insertion length allow for a snug fit in matching bores, promoting consistent thermal contact. Electrical Specifications These heaters operate on a 380V AC supply and draw 950W of power. The resistance element is designed to deliver steady, controllable heat output for processes that require reliable temperature maintenance. As with all cartridge heaters, it is important to match the supply voltage to the heater rating to ensure safe and efficient operation. Installation Guidance When fitting the heaters, ensure the bore is clean and sized to accept the 10mm diameter cartridge without excessive force. A light application of high-temperature lubricant can aid insertion and improve heat transfer. The 30cm lead wires should be routed away from sharp edges and excessive heat sources, and connections should be made in accordance with the electrical ratings specified. These heaters are suitable for use in a range of industrial heating applications, including packaging machinery, mould heating and laboratory equipment.