YTW 4 Pack 2.2 Inch Flex Sensors, Flexible Bend Sensor for Robotic Manipulators & Electronic Gloves

Product Principle & InstructionsBending Sensing PrincipleThis flex sensor converts bending deflection into resistance variation. Resistance rises as the bending angle increases. It is widely applied for developing smart electronic sensing gloves.Bending Direction NoticeThe printed side is the inner bending surface. Do not bend the terminal pin section (the fixed non-flexible end) during operation; improper bending will cause permanent damage to the sensor.Model & Technical ParametersModel: 2.2 Inch Flex SensorResistance (Flat Straight State): 25 kΩResistance Tolerance: ±30%Resistance Range When Bent: 60 kΩ ~ 110 kΩRated Power: 0.5 WPeak Power: 1 WService Life: Over 1,000,000 bending cyclesOperating Temperature: -35°C ~ +80°CInterface: 2 metal pins, 0.1 inch pin pitchTorque & Bending Resistance ParametersDesigned for electronic data gloves: When the metal substrate bends outward, resistance changes accordingly to detect bending angles accurately.Flat non-bending resistance: 9000 ΩResistance at 90° bend: 14000 ΩResistance at 180° bend: 22000 ΩProduct AttributesSensing Principle: Resistive bending sensorClassification: Analog output flex / pressure sensing componentOutput Signal: Analog signalOverall Size: 7.5 × 1 × 1 cmHousing Material: ABS plasticColor: YellowPackage List4 × Flex Bending SensorsNo other accessories are included.