YS 304 Stainless Steel Air Atomizing Nozzles, Water Mist Spray Fog Misting Nozzle Good Quality

Product description: Air atomizing nozzles made of high quality stainless steel materials, produce the finest mist of any nozzle type. Air and liquid is mixed at the spray tip to create the spray pattern. External spray set ups are ideal for spraying viscous liquids .The fluid line can be pressurized or supplied using a siphon or gravity fed configuration. Avaliable with cleanout and shut off needle. Air Caps: ①flat fan pressure type ②flat fan external mix pressure type ③flat fan siphon type ④round siphon type ⑤round pressure type ⑥wide angle round pressure type Other Parts: ⑦retainer ⑧flow rate adjustable needle Design Features: 1. Inner structural design makes liquid and air mix, and then sprays fine. Normally, we could increase the air pressure or reduce the liquid pressure, so that we could make the nozzles spraymore fine droplets (about 30micron). 2. Keeping liquid pressure and air pressure unchanged, as Adjustable air atomizing nozzle could adjust liquid flow rate, and then it also could spray according to your requirement. 3. Every spraying device consists of air cap and liquid cap. Spray pattern has flat fan, round, and wide-angle round spray. Nozzles also has widely flow rate. Inlet thread has different size which could be suitable for many pipe systems. 4. Air atomizing nozzle structure has pressure type, siphon type and gravity type. Note: when you use air atomizing nozzle, air pressure is necessary, but liquid pressure is not demanded. You could use pressure atomizing type with liquid pressure, while could use siphon atomizing type or gravity atomizing type. 5. Air atomizing device has two mixed type: inner mixed type and external mixed type. Inner mixed type could spray very fine, and it is suitable to use under many conditions. While, it is a good choose to use external mixed type to spray viscosity liquid. Applications: 1.Chemical Injection 2.Coating 3.Spraying 4.Viscous Liquids 5.Fogging 6.Humidification 7.Gas Cooling 8.Misting 9.Dust Control 10.Moistening Product display: