Digital Temperature Controller Thermostat Plug with Sensor for Reptile Incubator

A Backlit Digital Thermostat Controller for Reliable Temperature Management This upgraded 2.24-inch LCD display stands apart from many alternatives on the market, thanks to its built-in backlight. The clear screen and operation indicator allow you to check the controller’s status even in complete darkness, making it a practical choice for use in reptile enclosures, incubators, or other temperature-sensitive setups. The display keeps essential information visible at a glance, so you can monitor conditions without disturbing your setup. Flexible Heating and Cooling Control The controller offers a wide temperature regulation range from -40°C to 120°C (-40°F to 248°F). By setting the start and stop temperatures, you can manage heating or cooling devices with ease. When the start temperature is higher than the stop temperature, the unit operates in cooling mode; when it is lower, it switches to heating mode. The thermostat supports loads of up to 15A/120V and 1800W, making it suitable for a variety of equipment. A 1.7m (5.6ft) 10K temperature sensor probe is included for accurate readings, and the unit also supports temperature calibration within a range of -9.9°C to 9.9°C. Five Operating Modes for Versatile Use Five selectable modes provide flexibility to suit different routines. F01 offers cycle timing control, F02 enables countdown switch-on, F03 provides countdown switch-off, and F04 is a timed switching mode. The timing range spans from 0 to 99 hours and 59 minutes, with accuracy to the nearest 10 minutes. Celsius and Fahrenheit units can be toggled by holding the SET button until the temperature display changes. A memory function saves all current settings, while the screen lock protection prevents accidental adjustments and preserves your preferred configuration. A reset function is also available for quick restoration when needed.