26-27 Hot Sellers Rechargeable Watering Timer G1/2 Female Irrigation Controller

1 Comes with low voltage display. The controller will automatically shut down during low battery. 2 Achieve different watering times per day, the shortest water spray time is 1 minute, the maximum time is arbitrarily set, the number of watering times per day is 10 times or day: (can be controlled by programming) up to 10 times. 3 The housing is made from premium ABS plastic, waterproof and available for long service life. 4 It has the function of manual work and manual locking. 5 It's perfect for watering indoor plants, houseplants, potted plants, patio plants, hanging plants, etc.Features: Achieve different watering times per day, the shortest water spray time is 1 minute, the maximum time is arbitrarily set, the number of watering times per day is 10 times or day: (can be controlled by programming) up to 10 times. The housing is made from premium ABS plastic, waterproof and available for long service life. It has the function of manual work and manual locking. It's perfect for watering indoor plants, houseplants, potted plants, patio plants, hanging plants, etc. Irrigation frequency: irrigation at least once a day, up to 16 times and up to once every 30 days Display function: LCD display, standard time, irrigation control status, memory function. Specification: Condition: 100 percent Brand New Casing Material: ABS Size: Approx.10.8x8.5x7.5cm or 4.25x3.35x2.95in Weight: Approx.330g or 11.6oz Power supply: 2x 1.5V rechargeable battery and ordinary lighting Irrigation time: minimum 1 minute, maximum 9 hours 59 minutes Suitable for water pressure: 0-400 KPA Suitable for water temperature: 0-40 Programs can be set up: single program, multi-program, routine, cycle, single day,multi-day. Switch: automatic, manual Use: Garden irrigation timer Package List: 1x Timer 4x Accessories 1x User Manual Product installation and commissioning: 1. Connect the controller to the garden tap (the faucet is externally coarse-pitch thread), wrap the waterproof tape, tighten the sleeve nut connected to the faucet at the upper end of the controller with a black handwheel, and turn on the faucet to ensure no water leakage. 2. Connect the lower end of the controller to the hose of the drip irrigation system. 3. Set the controller watering program. 4. adjust the normal time Press and hold the Clock button, press Hour or Minute or Week to adjust the clock or week to the current normal time press Auto or Manual to perform On or Auto or Off state transition. The state should be placed in the "auto" position during normal operation and the LCD should have no mark " ", pay attention! If the mark "" appears in the "Auto" state, the water source cannot be turned off during regular operation! 5. Timing function setting or adjustment (1) After power-on, the system enters the timing mode (10 on 10 off output control). Press Timer to enter setting interface: "1 open 00:00 C1" - "1 off 00:00 C1"...to "10 off 00:00 C1" press again to cycle to the clock interface. Repeat the cycle at the above timing settings, press the Week, Hour, Minute keys in turn to adjust the setting of the day, hour, minute, and when there is output: the icon " " is displayed. (2) In the timing setting interface, when the hour key is pressed, the hour of the current timing can be adjusted. (3) In the timing setting interface, the minute of the current timing can be adjusted when the minute key is pressed. (4) In the timing setting interface, press the week button to adjust the setting of the week of the current time there are 15 weeks of combination mode for each "on" or "off" setting. Press the Week button continuously, and the week display can be cycled as follows: Monday Tuesday Wednesday Thursday Friday Saturday Sunday - Monday - Tuesday - Wednesday - Thursday - Friday- Saturday - Sunday - Monday Wednesday Friday - Tuesday Thursday Saturday - Saturday Sunday - Monday Tuesday Wednesday - Thursday Friday Saturday - Monday Tuesday Wednesday Thursday Friday - Monday Tuesday Wednesday Thursday Friday Saturday - Monday Tuesday Wednesday Thursday Friday Saturday Sunday - ... repeated cycles, the user can make the choice of the week combination according to the control needs. (5) In the timing setting interface, when the Cancel or Resume button is pressed, the group timing will be canceled or restored. (6) In the timing setting interface, the clock status is returned when the Clock key is pressed. (7) Press Auto or Manual to switch On or Auto or Off: When this button is pressed to the "on": it is always on When this button is pressed to the "off": it is always off When this button is pressed to the "AUTO: it will execute the switch program which is set, and no mark " " should appear. What's in the box 1 x Timer, 4 x Accessories, 1 x User Manual