DC Motor Adjustable Speed Controller 12V 24V 48V PWM Forward Reverse

Function Introduction 1. Soft start time setting: 000-100 (0-10 seconds) adjustable, default 1 second 2. Soft stop time setting: 000-100 (0-10 seconds) adjustable, default 1 second 3. Maximum Speed Scale Setting: 000-9990 (0-9990), default 100 4. Speed lower limit setting: 000-9980 (0-9980) adjustable, default 0 5. Speed upper limit setting: 000-9980 (0-9980) adjustable, default 100 Note: For the above 3 functions, thousands of bits will flash and not be displayed if the value in the setting interface exceeds 999 bits 6. Speed increase/decrease value setting: 001 002 005 010 015 020 025 050 100. Each press of the increase/decrease button changes the speed by the corresponding value 7. Power on start mode: Mode 1: Motor does not start after power on; Mode 2: Starts after power on, default mode 1 8. Total running time setting: 0~99:59:59 can be set. All 0 means no timing, default 0 9. Forward rotation time setting: 0~99:59:59 can be set, default 10 seconds 10. Stop time setting: 0~99:59:59 can be set, default 10 seconds 11. Reverse time setting: 0~99:59:59 can be set, default 10 seconds Note: Long press the setting button for 2 seconds to switch between hours, minutes, and seconds for the above 3 functions 12. Manual automatic mode selection: Mode 1 is manual mode (functions 8, 9, 10, 11 do not take effect); Mode 2 is automatic mode (functions 8, 9, 10, 11 take effect) Parameters Input voltage: DC 6-55V Maximum current: 20A Display method: LCD color screen Forward and reverse: bidirectional Speed regulation method: button and knob Wireless remote control: Yes Supported load: compatible with DC brushless motor Installation method: embedded Wiring type: fence type terminal Net weight of product: 95g+25g Product size: width 77mm x height 57mm x thickness 38mm Opening size: width 72mm x height 52mm Material: Plastic Wiring Instructions Input voltage ranges within 6-55V DC (the specific voltage shall be equal to the rated voltage of the motor) - Input power positive terminal - Power negative terminal - Motor positive terminal - Motor negative terminal Operation Guide 1. Remote control code matching: Long press the setting button, then power on, press any key on the remote control once. The backlight flashes twice, which indicates code matching is successful 2. Restore factory settings: Enter the settings interface, press and hold the setting button for 6 seconds, the backlight flashes twice, which indicates factory settings restoration is successful 3. Appearance difference due to different product batches will not affect use Package Contents 1 x Speed Controller 1 x Remote control