30W Class D Mono Digital Amplifier Board Module 12V 24V Efficiency for 4 Ohm 8 Ohm Speakers

CHF 16.95
+ CHF 3.49 Versand

30W Class D Mono Digital Amplifier Board Module 12V 24V Efficiency for 4 Ohm 8 Ohm Speakers

Verkauft von:

CHF 16.95

Bespaar CHF 8.00 (32%)

UVP

CHF 24.95
Auf Lager
+ CHF 3.49 Versand

14 Tage Rückgaberecht

Zahlungsmethoden:

  • Marke: Unbranded

Produktdetails

Produktdetails

30W Class D Mono Digital Amplifier Board Module 12V 24V Efficiency for 4 Ohm 8 Ohm Speakers

Singlechannel Class D power amplifier module for DC 7.5 to 24V systems. Designed for efficient mono amplification with low idle and shutdown currents and multiple output configurations for 4 ohm and 8 ohm loads. Key benefits Wide input voltage range: runs from DC 7.5 to 24V, making it compatible with automotive, batterypowered, and many embedded power systems. Low standby consumption: quiescent current only 11 mA at 12V and shutdown current below 0.3 mA at 12V, preserving battery life in idle or poweredoff states. efficiency Class D operation using PWM modulation reduces heat and improves power conversion efficiency compared to linear amplifiers. Flexible power output: supports several output levels to match speaker impedance and available supply voltage while offering options for higher power or lower distortion operation. Mono channel output: suitable for singlespeaker applications such as subwoofers or dedicated channel amplification. Technical highlights Power supply range: DC 7.5 to 24V Quiescent current: 11 mA (measured at 12V) Shutdown current: <0.3 mA (measured at 12V) Working mode: Class D with PWM modulation Channel: Mono Output power (THD+N = 10%): 30 W into 4 ohm at 16V, 17 W into 4 ohm at 12V, 15 W into 8 ohm at 16V, 9 W into 8 ohm at 12V Output power (THD+N = 1%): 25 W into 4 ohm at 16V, 12 W into 8 ohm at 16V Why this module solves common problems Efficient power use reduces heat and frees system space that would otherwise be needed for heatsinking, enabling cleaner installations and longer component life. Low idle and shutdown currents make it suitable for batteryoperated designs where minimizing standby drain is critical. Multiple defined output points let you choose higher power when distortion tolerance is acceptable or lower distortion operation when audio quality is a priority. Practical applications Car audio subwoofer amplifier: Use the mono channel to drive a subwoofer from typical vehicle 12V systems or highervoltage aftermarket setups. Portable or batterypowered speaker systems: Low quiescent and shutdown currents help extend runtime when the system is idle, while the wide input voltage range supports different battery packs. Singlechannel public address or signal amplification: Drive a single loudspeaker for announcements or signal reinforcement in kiosks, vending machines, or industrial equipment. What to consider when integrating Match speaker impedance to the specified 4 ohm or 8 ohm output ratings and select supply voltage to achieve the desired balance of power and distortion. Provide appropriate layout and wiring to maintain PWM signal integrity and minimize noise pickup. Use the module in applications that require a mono output; for stereo systems, two modules will be needed. This amplifier module delivers flexible mono power with low standby drain and efficient Class D operation, making it suitable for automotive, portable, and embedded audio projects where power efficiency and reliable singlechannel performance are required.
  • Fruugo-ID: 556651904-1124649768
  • EAN: 6428847405354
Sicherheit

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • Wuhan Jinmaohu Trading Co., Ltd.
  • Wuhan Jinmaohu Trading Co., Ltd.
  • Fujihua Fu West Road, Daji Street, Caidian District, Wuhan
  • Fangxing Phase 1 and 2, No. 205, Area A, 1052
  • Wuhan
  • CN
  • 430100
  • [email protected]
  • 8618563605502

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • Apex CE Specialists GmbH
  • Apex CE Specialists GmbH
  • Grafenberger Allee 277
  • Düsseldorf
  • DE
  • 40237
  • [email protected]
  • 4921186392011
Lieferung

Lieferung

Versand innerhalb von 7 Tagen

  • STANDARD: CHF 3.49 - Lieferung zwischen Mi. 09 Dezember 2026–Do. 17 Dezember 2026

Versand aus China.

Rücksendung

Rückgabe

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihren Bestellangaben an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten.

Vollständige Rückgabebedingungen ansehen