50W+50W Bluetooth Audio Amplifier Board HiFi Stereo Power Module with Tone Control for DIY Speakers

CHF 20.95
+ CHF 3.49 Versand

50W+50W Bluetooth Audio Amplifier Board HiFi Stereo Power Module with Tone Control for DIY Speakers

Verkauft von:

CHF 20.95

Bespaar CHF 10.00 (32%)

UVP

CHF 30.95
Auf Lager
+ CHF 3.49 Versand

14 Tage Rückgaberecht

Zahlungsmethoden:

  • Marke: Unbranded

Produktdetails

Produktdetails

50W+50W Bluetooth Audio Amplifier Board HiFi Stereo Power Module with Tone Control for DIY Speakers

Compact stereo power amplifier module with tone control and protection features Key benefits Improves or restores audio output for small stereo systems and speaker projects by providing up to 50 W per channel under suitable conditions. Simple tone controls let you tailor treble and bass without external equalizers, making it easy to match speakers and listening environment. Builtin protections reduce the risk of damage from overheating, overcurrent, short circuit, and undervoltage, so the module can be used reliably in DIY installations and repairs. Compact, aluminum alloy construction and included hardware make replacement or retrofit straightforward. Main features Four protections: overheat protection, overcurrent protection, short circuit protection, and undervoltage protection. Tone controls: adjustable and low tone controls for quick adjustment of treble and bass. Inputs: Aux input and Bluetooth 5.0 connectivity with up to 15 m range without obstruction. Stereo output: two channels, left and right. Low distortion twoband design for a wide adjustment range and clean sound. signal to noise ratio: SNR greater than 90 dB. Solid construction: aluminum alloy plates and included heat dissipator for improved thermal performance. Compact size: approximately 89 x 60 x 21 mm. Power and speaker compatibility Applicable power supply: DC 9 to 24 V, 3 A or more. Do not connect a 24 V battery directly. Recommended speaker impedance: 4 to 8 ohm. Recommended speaker power: 15 to 100 W. Typical output at various supply voltages and impedances: 12 V: 8 ohm: 12 W + 12 W, 4 ohm: 20 W + 20 W 15 V: 8 ohm: 18 W + 18 W, 4 ohm: 30 W + 30 W 19 V: 8 ohm: 30 W + 30 W, 4 ohm: 30 W + 30 W 24 V: 8 ohm: 40 W + 40 W, 4 ohm: 50 W + 50 W What is in the box 1 x stereo amplifier module 2 x aluminum alloy plates 3 x knobs 1 x heat sink 1 x adjustment pod 1 x screwdriver 8 x screws 8 x studs Practical applications or the amplifier board in a portable speaker or small home stereo system to restore stereo output and tone control. Upgrade a DIY desktop audio setup to add Bluetooth streaming and adjustable treble and bass. Power small installation speakers for a workshop, garage, or hobby room where compact size and simple controls are needed. Installation notes Designed for easy installation with included mounting hardware and knobs. Clear wiring for power, speakers, and inputs makes the module accessible to users with basic electronics experience. Verify power supply voltage and polarity before connecting. Use a DC power supply capable of delivering at least 3 A. Avoid connecting a 24 V battery directly to the module. Match speaker impedance to the module recommendations and adjust tone controls for the balance. Allow clearance for the heat sink to ensure proper cooling. Technical summary Type: power amplifier plate Material: aluminum alloy Bluetooth version: 5.0, up to 15 m range without obstruction Signal to noise ratio: greater than 90 dB Channels: stereo, left and right Input methods: Aux and Bluetooth Protections: overheating, overcurrent, short circuit, undervoltage Size: approximately 89 x 60 x 21 mm This amplifier module is a practical choice for replacing damaged boards, upgrading small speaker systems, or integrating into compact DIY audio projects where tone control, protection features, and clear stereo output are required.
  • Fruugo-ID: 556880049-1125089809
  • EAN: 6218413292002
Sicherheit

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • Guangzhou Jieshi Trading Co., Ltd.
  • Guangzhou Jieshi Trading Co., Ltd.
  • 4, Kejiazhong Lane, Xinke, Baiyun District
  • Room 202
  • Guangzhou
  • CN
  • 510000
  • [email protected]
  • 8617623655815

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • Apex CE Specialists GmbH
  • Apex CE Specialists GmbH
  • Grafenberger Allee 277
  • Düsseldorf
  • DE
  • 40237
  • [email protected]
  • 4921186392011
Lieferung

Lieferung

Versand innerhalb von 7 Tagen

  • STANDARD: CHF 3.49 - Lieferung zwischen Mo. 07 Dezember 2026–Di. 15 Dezember 2026

Versand aus China.

Rücksendung

Rückgabe

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihren Bestellangaben an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten.

Vollständige Rückgabebedingungen ansehen