200kg Aluminium Beam Load Cell

A high-reliability, single-element load cell engineered for 200 kg industrial weighing tasks. Its core is precision-machined from aluminium alloy — offering excellent strength, low density and inherent resistance to oxidation. The beam’s geometry is optimised for uniform stress distribution and minimal lateral-force sensitivity. With IP65 protection, it withstands routine washdowns, dust-laden air and condensation-prone settings — commonly deployed in feed mills, aggregate blending systems, postal sorting conveyors and modular checkweighers. All primary accuracy metrics — comprehensive error, non-linearity, hysteresis, repeatability and creep — are independently verified at ±0.02 %F.S. Sensitivity is 1.0 ±0.1 mV/V, with output variation bounded at ±2 %F.S. Electrical characteristics conform to European industrial norms: input impedance 405 ±10 Ω, output impedance 350 ±3 Ω, insulation resistance ≥5000 MΩ (100 VDC). Compatible with excitation sources from 5 VDC to 12 VDC. Temperature compensation applies between 10°C and +40°C; full operational range spans −20°C to +60°C. Thermal influence on output is ≤0.03 %F.S./10°C; on sensitivity, ≤0.02 %F.S./10°C. Overload capability is validated at 120 % (safe) and 150 % (limit). Delivered as a stand-alone sensor. No cables, junction boxes, mounting hardware or calibration certificates are included — users should engage qualified instrumentation technicians for final commissioning and periodic verification.