10pcs O2 Oxygen Sensor Spacer Test Pipe Extension Extender Adapter Cel M18x1.5 Hho 45mm Bung Test Pi

79.00 CHF
+ 7.99 CHF Livraison

10pcs O2 Oxygen Sensor Spacer Test Pipe Extension Extender Adapter Cel M18x1.5 Hho 45mm Bung Test Pi

  • Marque: Unbranded
Verkocht door:

10pcs O2 Oxygen Sensor Spacer Test Pipe Extension Extender Adapter Cel M18x1.5 Hho 45mm Bung Test Pi

  • Marque: Unbranded

79.00 CHF

Économisez 15.00 CHF (15%)

Prix de vente recommandé

94.00 CHF
En stock
+ 7.99 CHF Livraison
Verkocht door:

79.00 CHF

Économisez 15.00 CHF (15%)

Prix de vente recommandé

94.00 CHF
En stock
+ 7.99 CHF Livraison

Nous acceptons les modes de paiement suivants

Description

Product Lenght is 45mm long On ODB-II vehicles (96+), the ECU has two O2 sensors for diagnostic purposes. The first O2 sensor is located before the Catalytic Converter. This O2 sensor is responsible for all the Air/Fuel tuning and is imperative to the operation of the vehicle. The second O2 sensor is located after the Catalytic Converter. The whole purpose of this O2 sensor is to ensure that there is a functioning catalytic converter in the system. The way it can detect this is to make sure that there is a difference in exhaust gaes between the first O2 sensor and the second. If the same exhaust reading is detected, then the ECU knows that there is either a damaged Catalytic Converter or no Catalytic Converter at all. The ECU will then trigger a Check-Engine Light. On some instances, the vehicle will be thrown into a "Null" mode where the vehicle will not go over a certain speed and will be basically rendered usele. This mechanical O2 fix is basically a way to space out the O2 sensor so that it still reads SOME exhaust gaes but it removes the O2 sensor from the direct flow of the gaes as to make the ECU believe there is a restriction in the exhaust gaes such as by a Catalyst. There is NO GUARANTEE that this product will work on your specific application. There are always mixed results depending upon the layout of the exhaust system and the tuning of the ECU, however, this mechanical O2 fix is well known for eliminating most CEL s caused by an O2 Sensor. NOTE: There is no guarantee that this will eliminate your O2 sensor CEL. Some vehicles will need their ECU reset if the CEL is triggered before hand. - O2 Sensor Thread Pitch: M18x1.50 NOTE: All Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pa SMOG. Please check your local laws. Package Included: 10 PACK 45MM O2 OXYGEN SENSOR EXTENDER NOTE: If you have any questions, please feel free to contact us. We will respond you as soon as poible.
  • Identifiant Fruugo: 319920897-710454669
  • EAN: 7061391670909

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Please read the instructions and precautions before use
Ingrédients: 90% plastic and 10% metal

Livraison & retours

Expédition dans un délai de 14 jours

  • STANDARD: 7.99 CHF - Livraison entre mer. 10 décembre 2025–mer. 17 décembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour