Ingredients: sodium hypochlorite, hydroxide, etc. Capacity: about 120ml Size: about 18*6.5*3cm/ 7.08*2.55*1.18 inch Shelf life: 3 years Instructions: 1. Wipe the dust and moisture from the mold surface with a dry towel. 2. Open the lid of the product and squeeze it about 3 mm thick at the mold. Leave it for 3~5 hours and wipe with water. 3. Confirm the sterilization effect, if it is not completely removed, please repeat it. Precautions for use: 1. Do not use it outside the intended use. 2. Keep ventilation when using. Rubber gloves are recommended. 3. Cover the lid after use and keep out of reach of children. 4. If you accidentally touch the skin or enter the eyes, please wash it with water immediately. 5. If you accidentally eat, please immediately drink water and vomit and seek medical advice. 6. Fading will appear on the clothes, please be careful. 7. According to the degree of pollution, the sterilization effect will be different. 8. If the solution is frozen or close to a heat source, the solution will become thinner. Package List 1* Mold-free Gel 1Applicable to: Suitable for glass, plastic, floor tiles, walls, etc. 2 Strong sterilization: The wall tiles and other ceramic tile wall sealant and other effective sterilization up to 99%. 3 Effective removal: Easy to remove, convenient and fast. 4 Easy to use: Gel texture can be used on vertical or inclined surfaces. 5 Long service life: Reusable with a shelf life of three years.