3/4 in. x 1/2 in. CPVC-CTS 90-Degree Slip x Slip Reducing Elbow Fitting

10.95 CHF
+ 58.49 CHF Livraison

3/4 in. x 1/2 in. CPVC-CTS 90-Degree Slip x Slip Reducing Elbow Fitting

3/4 in. x 1/2 in. CPVC-CTS 90-Degree Slip x Slip Reducing Elbow Fitting

Prix : 10.95 CHF
Verkocht door:
10.95 CHF
+ 58.49 CHF Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

The NIBCO CPVC-CTS 90-degree elbow is made of FlowGuard Gold CPVC and is ideally suited for hot and cold water pressure distribution systems in residential and commercial applications. The CPVC-CTS 90-degree elbow features female socket connections and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry. Features: 3/4 X 1/2 in. Inside Diameter and 7/8 x 5/8 in. Outside Diameter Maximum service temperature 180°F Not for use with compressed air or other gases ASTM ASTM D NSF U.P. Certified NSF/ANSI Size range 1/2" to 2"
  • Identifiant Fruugo: 197708451-421562085
  • EAN: 3291314192919

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Avertissements de sécurité: CPVC can withstand temperatures up to 200°F (93°C). Exceeding this limit can cause the material to soften, deform, or fail. Avoid exposure to excessive heat or high-temperature water above the specified limit. Installation: Ensure that the fitting is properly installed using the correct solvent cement and primer (if required). Improper installation can lead to leaks or system failure. Always follow the manufacturer's instructions for installation. Pressure Rating: CPVC fittings are rated for specific pressure ranges, usually up to 400 PSI for standard sizes like 3/4 inch. Verify the pressure rating of the system to avoid over-pressurizing the system, which could cause leaks or breakage. UV Exposure: CPVC fittings should not be exposed to prolonged direct sunlight as UV radiation can degrade the material. If exposed outdoors, consider protecting the fitting with UV-resistant coatings or housing. Freezing: CPVC can become brittle in extremely cold temperatures. Avoid using CPVC in environments where temperatures may fall below freezing, as this could cause the material to crack or break.

Livraison & retours

Expédition dans un délai de 10 jours

  • STANDARD: 58.49 CHF - Livraison entre ven. 17 octobre 2025–ven. 31 octobre 2025

Expédition de États-Unis.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour