3pcs Children's Tableware Suction Cup

The non-slip design of the suction cup can effectively prevent the bowl from moving on the desktop. It is suitable for any tableware with smooth bottom, such as tableware, soup pot and other household utensils, to prevent rolling. It can also be used as a coaster, with excellent heat resistance and high and low temperature impact resistance. Silicone rubber characteristics: temperature range -65C-230C can be used for a long time and maintain its soft and elastic properties, has excellent electrical properties and chemical stability, water resistance, ozone resistance, weathering resistance, non-corrosive, with Physically inert, non-toxic, tasteless, low linear shrinkage, easy to operate and other characteristics. Main features High and low temperature impact Fast curing Very low odor no harm to human body during vulcanization No need to use primers for multiple substrates Excellent heat resistance, ozone resistance and chemical resistance Excellent electrical insulation properties . Silicone mold cleaning and maintenance 1. Before using for the first time, it can be cleaned with water or detergent to remove surface dust. Before baking in the mold, apply a small amount of butter inside the mold. When using the mold, if there is an empty tank, add water to the empty tank. 2. After each use, it can be soaked in diluted detergent for 10-30 minutes. When cleaning, use a soft cloth to clean. Do not use rough cleaning balls and other items to clean, so as not to damage the mold scratches. After washing, let it dry and put it in the storage box. Silica gel easily reacts with static electricity, and it will adsorb tiny particles and dust in the air. When not in use for a long time, avoid direct exposure to the air. 3. When using in the oven, it must be placed in the middle of the oven, and a distance of about 10cm from the heating tube, and a distance of 5cm from the walls of the oven, so as not to damage the mold at high temperatures. 4. There are cracks in some molds. This is cut open at the time of shipment to facilitate demoulding. If it is not cut, it cannot be demolded. When using, in order to make a good cut, wrap it with plastic wrap or put a rubber band on it and pour it into the liquid Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.