Features:Color: Black/red/blue/white/greyType: Auto Remote Control DuplicatorMaterial: Metal+PlasticSpecifications:Working voltage: DC12V (27A battery is not including)Operating Current: 8mAWorking frequency: 433MHzModulation Mode: ASK (AM)The transmission power: 100mWEmission Distance: 100 m (proof)The encoding type: self CopyThe working temperature: -10 C to +50 CWorks with the following remote control IC modules (please check your original remote control becompatible withe ordering),and your remotes also should be Fixed code or Learning code. AX5326-3. PT2262. PT2260. EV1527. FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D,etcApplication: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control productsHow to Program:Step 1 delete the existing code of our remote duplicator1)Click and Hold A and B buttons together - Led will flash 3 times2)Keep holding A button and release B button3)Keep holding A button and push B button 3 times, Led will start flashing Non-stopNow press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted Step 2 - clone your original remote1)Put both remotes Into back to Back position. Make sure they have direct-contact2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)If compatible with some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.Package Contents:1 x Remote Control DuplicatorThank you compatible with your supportWelcome to buy from usWe guarantee the quality of our products.Have a nice day