Features: Features a single durometer blade with flat bottom.Single piece of polyurethane material.Designed to balance the squeegees resistance to all types of different inks.Maintains a high resistance to abrasion.Features a classic style contoured wooden handle.Smooth Hardwood Finish.Measurement (Length): 8 inch.Approximately 1.5 inch of Polyurethane is exposed from the wooden handle.Introduction: Squeegee is also called scraper, it is one kind of tool used to scratch the ink on the screen to make it leak to the substrate. for both graphic and textile applications, for all hand printing and many machine applications.These squeegees are Kiln-dried and cut lumber is used for the no-warp handles, which are smooth, comfortably shaped and easy to handle, helping in eliminating any symptoms of carpal tunnel syndrome. Blades are molded under high heat and pressure and have a tensile strength of more than 2,000 lbs. This eliminates ink streaking and provides a superior long-lasting printing edge.Specification: Material: rubber, WoodHardness: 70 DurometerLength: 20cm/7.9 inchWidth: 10cm/3.9 inchThickness: 2.3cm/0.9 inchColor: As shownPackage Included: 1 x 70 Durometer 20cm Screen Printing Squeegee BladeNote: A Durometer Instrument or Gauge was not used to test hardness of the squeegee. The hardness of squeegee material usually falls between 50 and 90 with 50 being the softest and 90 being the hardest. In our opinion these are medium-soft as they are somewhat pliable and if you press your nail into the rubber it will leave an indentation. We would give this a rating of 60, being Medium-Soft. Only the above package content, other products are not included.Note: Light and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.