Colour: Black material: metal Lift Your Jack Very Easy: Easily use with your scissor jack,Suitable to most of loop type or double eyelet type scissor jacks in the market(if you are worry about it's compatibility,please check the oval's size on your jacks) Easy to use with the following tools: 1) 1/2 inch drive/impact drills/ratchet or standard drive sockets 2) 13/16 inch lug wrench/tire iron or socket or easily add a half inch adapter to any drill 3) If you don't have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to 1/2 inch adapter and use any cordless or corded drill with this tool and those difficult scissor jacks Exterior: Black oxide Item Weight: 135 g(4.86 ounces) Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches) Slot Size: 8.8 mm(0.35 inch) wide, 23.90 mm (0.94 inch) deep Bolt Length: 4.1 cm (1.6 inches) Bolt Dimensions: 0.97 mm ( enough to fit most of scissor jacks ,to this ,you can check the oval's size on your jacks) Note: 1.If you don't have a 1/2 inch hex or impact wrench,you can very easily get a standard drill bit to 1/2 inch adapter and use any cordless or corded drill with this tool and those difficult scissor jacks 2.This adapter fits most of the scissor jacks in the market, including loop type(hole diameterGreater than 9.7 mm) or double eyelet type(hole diameter 9.7 mm, eyelet distance Less than 16.5 mm) 3.There are rare cases some 1/2 inch drives can't fit this adapter,it is most likely is not 1/2 inch,Pls change another drive or contact us to return it Package Contents:1pcs*Wrench Tools Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.