LAUNCH X431 TSENSOR-05 TPMS Sensor 315MHz/433MHz Dual Frequency Screw-in Adjustable Angle Metal -Se

59.00 CHF
+ 3.99 CHF Livraison

LAUNCH X431 TSENSOR-05 TPMS Sensor 315MHz/433MHz Dual Frequency Screw-in Adjustable Angle Metal -Se

  • Marque: Unbranded
Verkocht door:

LAUNCH X431 TSENSOR-05 TPMS Sensor 315MHz/433MHz Dual Frequency Screw-in Adjustable Angle Metal -Se

  • Marque: Unbranded

59.00 CHF

Économisez 15.00 CHF (20%)

Prix de vente recommandé

74.00 CHF
En stock
+ 3.99 CHF Livraison
Verkocht door:

59.00 CHF

Économisez 15.00 CHF (20%)

Prix de vente recommandé

74.00 CHF
En stock
+ 3.99 CHF Livraison

Nous acceptons les modes de paiement suivants

Description

1. 2 IN 1 FEATURE: Only 1 Sensor to service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no relearn required. The -Sensor is 100% cloneable with the old sensor ID and put in the same position. 2. 98% COVERAGE: Featuring the latest and most comprehensive coverage of 98% sensors on the market, and up to 90% of , European and Asian vehicles, it nearly fits all types of wheels on the road. 3. EASY TO USE: The maximum sensor signal strength allows sensors to be easily programmed wirelessly even when they have already been mounted to the wheel. Moreover, the release valve design makes the manual sensor replacement much easier. 4. SOLID & : Equipped with an automotive grade battery, a replaceable aluminum/rubber valve stem to withstand cold, hot and resistance , and a high- air valve to prevent air leakage, this sensor ensures superior stability and performance. Features: Compatible with over 95% sensors Compatible with Part Number sensors of 315MHz/433MHz Over-the-air wireless programming Unlimited number of reprogramming for LAUNCH sensor. User-friendly Design & Easy Installation Steps: 1. Loosen The Tire: Remove the valve cap and core and deflate the tire. 2. Demount The Tire: Clamp the tire onto the tire changer, and adjust it to the right position to dismount the bead. 3. Dismount The old Sensor: Remove its cap, screw nut, and washer from the valve stem, and then remove the sensor assembly from the rim. 4. Assemble The New for LAUNCH -Sensors to The Wheel. 5. Mount The Tire Bead into The Wheel. When the programmed for LAUNCH MX-Sensors work well with the TPMS system, it brings great benefits to you: Monitor whether the tires are properly inflated or not on the vehicle's dashboard. Proper tire pressure inflation optimizes tire performance optimize the tire's traction shorten the distance improve the economy slow the wear of the tread area Notify the drivers with a flat tire warning light timely to avoid possible danger. Facilitate all users to replace TPMS sensor timely and reduce extra cost for your car. Color:Black Material:Metal Package Contents: 4 * TPMS Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Identifiant Fruugo: 432326425-907922693
  • EAN: 6134027458477

Livraison & retours

Expédition dans un délai de 3 jours

  • STANDARD: 3.99 CHF - Livraison entre mer. 19 novembre 2025–mer. 26 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Hpcl Factory
  • hui zhou shi tang tang ke ji you xian gong si
  • Cheng Qu San Dong Zhen Zhu Yuan Lu 8 hao
  • Zhong Zhou Tian Yu Hua Yuan Di 10 dong 27 ceng 01 hao Fang
  • Hui Zhou
  • China
  • 516000
  • qingmingdo@outlook.com
  • 15363471640

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr 56 40239 Duesseldorf
  • Brehmstr
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698