4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

64.00 CHF
la livraison GRATUITE

4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

  • Marque: Unbranded

4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

  • Marque: Unbranded
Prix de vente conseillé : 119.00 CHF
Prix : 64.00 CHF
Vous économisez : 55.00 CHF (46%)
Verkocht door:
64.00 CHF
la livraison GRATUITE

En stock

Nous acceptons les modes de paiement suivants

Description

New ModelsWide Application: This finder can be used to detect the position of the center of wood rod in the walls of wooden planks and plasterboard, as well as the position of metal and AC cables, so that you can accurately install TVs, cabinets, drill holes in the wall, etc.4-in-1 detection mode: This stud finder has 4 different modes that can be switched: stud scanning , Deep Mode, Metal Scan and AC Scan.Multifunctional: Stud Scan is used to find and locate the center and edge of wood and metal studs with a depth of 19mm The maximum deep scan positioning depth is 38 mm Maximum metal detection depth reaches 60mm AC Scanning can detect AC wires with a depth of 51mm.Screen display and alarm prompt: During the detection process, the display screen will show the detection mode , signal strength, direction indication, etc. Also, the intensity of the buzzer will vary depending on the distance between you and the target, you can mark the position with a marker when the sound is loudest. And it has AC warning function.Easy to calibrateYou need to calibrate the detector before every scan. You first select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the dimming bar disappears and a beep sounds. In metal or AC mode, you need to place it in the air for calibration.Product DescriptionWide ApplicationThis finder can be used for detect the position of the center of the wood rod in the walls of wooden planks and plasterboard, as well as the position of metal and AC cables, so that you can accurately install TVs, cabinets, drill holes in the wall, etc.How to calibrateYou must calibrate the detector before each scan. You first select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the dimming bar disappears and a beep sounds. If you accidentally shake the scanner, you need to recalibrate the device. In metal or AC mode, you need to place it in the air for calibration.SpecificationColor: Black and silverPackage included:Wall sensorx1Batteryx1
  • Identifiant Fruugo: 392380352-839506063
  • EAN: 9107337647340

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre mer. 08 octobre 2025–mar. 14 octobre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Zhuzhou Kemai Trading Co., Ltd
  • Zhuzhou Kemai Trading Co., Ltd
  • Shop No. 106-M105, No. 3 Factory, No. 3, Baiguan Industrial Park, No. 136, Dongfu 2nd Road
  • Zhuzhou
  • CN
  • 412002
  • hulking2025@163.com?
  • 19377106697

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901