Intelligent non-contact level detector (hereinafter referred to as level detector) utilizes advanced signal processing technology and a high-speed signal processing chip, overcoming the influence of vessel wall thickness to achieve true non-contact measurement of liquid levels in sealed containers. The level sensor (probe) is installed at the top and bottom of the measuring vessel (high level and low level). Non-metal vessels do not require drilling holes, ensuring easy installation and minimal disruption to production processes. It can be employed for various toxic substances, strong acids, strong alkalis, and all types of level measurement in high-pressure sealed containers or tanks. This product is broadly applicable, with no special requirements for liquid media or vessel materials. 1: The model XKC-Y26-V is suitable for non-metal pipe walls, requiring no contact with the liquid and resistant to corrosion from strong acids, strong alkalis, and other corrosive liquids. It remains unaffected by deposits or impurities. 2: Intelligent level adjustment and memory functions, along with a level status display method, allow for multiple point series connections. It facilitates non-contact detection of liquid levels within closed containers. The liquid level sensor is installed on the upper and lower sides of the container (indicating high and low liquid levels). The non-metallic container does not require hole drilling. It can detect the levels of various toxic substances, strong acids, alkalis, and other liquids in high-pressure airtight containers. DIY Supplies: Electrical The liquid level sensor has no specific requirements regarding liquid types and container materials, allowing for extensive versatility. The installation is straightforward and does not impede production. The output signal indicates High and Low Levels. Product model: XKC-Y26-V Input voltage (Vin): DC 5~24V Output Signal: High and Low Levels Current consumption: 5mA Output voltage (high level): Vin Output voltage (low level): 0V Output current: 1~100mA Response time: 500mS Working environment temperature: 0~85 degrees Celsius Humidity: 5%~100% Waterproof performance: IP65 Sensitivity: Pipe outer diameter D(mm) Sensing wall thickness L(mm) D >= 100, L: 20 +/- 2 100 > D >= 80, L: 15 +/- 2 80 > D >= 60, L: 12 +/- 2 60 > D >= 40, L: 7 +/- 1 40 > D >= 30, L: 5 +/- 1 30 > D >= 20, L: 3 +/- 1 20 > D >= 10, L: 1.5 +/- 0.5 Applicable pipe diameter range: >= 10mm Level error: +/- 1.5mm Color: White + Black Material: ABS Size: 18 x 13 x 11mm Cable Length: 45cm Package Contents: 1* Liquid level sensor Only the above package content; other products are not included. Note: Lighting and different displays may cause the item's color in the picture to differ slightly from the actual item. The allowable measurement error is +/- 1-3cm.