Features: 1. The ESP32S2 Display Development Board Uses The Espressif Esp32-S2fh4 Chip. The ESP32-S2 Series Chip Is Equipped With An Xtensa 32-Bit Lx7 Single-Core Processor With An Operating Frequency Of Up To 240mhz. 2. Esp32-S2fh4 Comes With 320 Kb , 128 Kb Rom, And 4mb On-Chip Flash. This Series Of Chips Provides A Wealth Of Peripheral Interfaces, Including Spi, I2s, Uart, I2c, Led Pwm, Lcd Interface, Camera Interface, Etc. 3. 2.4-Inch Tft Display, Resolution 240x320, Driver Chip 7789, Without Touch, Controlled By Spi. Power Consumption Is Approximately 0.22w. 4. The Onboard Ch340k Serial Port Chip Can Automatically Download Without Pressing A Button, Making Programming Very Convenient. 5. Onboard Ws2812b Colored Light, Which Can Be Programmed To Control The Light Color And Brightness. Dual Usb Type-C Interfaces, One For Serial Port Connection And One As Usb Interface. Description: Name: ESP32S2 2.4-Inch 240x320 Display Development Board Applicable Interface Range: SPI, 12S, UART, 12C, LED PWM, LCD Interface, Camera Interface, Etc. Note: Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Not Affect The Use size: About 60 x 50mm Material: PCB colour: As shown Package Contents: 1 x Display Development Board Module 2 x Single Row Pin 15pin Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.