Easily disassemble the compressed sleeve: This compressed sleeve pull -uper design is used to remove the compressed sleeve and ring from the copper pipe, and easily remove the compressed sleeve without damaging the wall or pipeline.tool. How to use: 1. Remove the old compressed accessories or the old angle baffle.2. Along the copper tube nuts with the golden threaded mouth of the pull tool, and then tighten.3. Make sure that the capsule pulls the pipes correctly, and then rotate the handle 10 circles.4. When you rotate the handle, the compressed ring pulls the handle and pull the compressed nut and ring to remove the nut and ring. Excellent durable quality: This compressed sleeve pulling tool uses high -quality materials, which not only has excellent corrosion resistance and abrasion resistance, but also in the case of extreme corrosion or water supply to stop frozen, you can still easily rotate the pole, from the fromThe old compressed sleeve was successfully removed in the pipeline. Farewell to the trouble of leakage pipes: The compressed ring disassembly tool makes the process quickly and simple, saving a lot of time and energy.If you have any questions or problems after buying a packing tool, please contact us at any time, we will serve you wholeheartedly. Note: Please check carefully before buying. This compressed sleeve pullover is only applicable to compressed accessories of 1/2 inches (about 1.3 cm). Colour:As Shown Material:Metal Package Contents: 1x plumbing tools