Voltage Frequency Converter Module 0-10V to 0-50KHz PLC Electronic Supplies

9.95 CHF
+ 4.99 CHF Livraison

Voltage Frequency Converter Module 0-10V to 0-50KHz PLC Electronic Supplies

  • Marque: Unbranded

Voltage Frequency Converter Module 0-10V to 0-50KHz PLC Electronic Supplies

  • Marque: Unbranded
Prix de vente conseillé : 28.95 CHF
Prix : 9.95 CHF
Vous économisez : 19.00 CHF (65%)
Verkocht door:
9.95 CHF
+ 4.99 CHF Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

Features: 1. The module can control the frequency generated according to the input voltage level 2. According to the level of the input voltage, the frequency of the output will also change in proportion to the relationship. 3. The power supply has anti-reverse function 4. The power indicator is on after power up 5. High quality material can make sure the durability of the product Specification: Condition: 100% Brand new Item Type: Voltage Frequency Converter Module Model: VF-10V50KHz Input Control Voltage Range: 0-10VDC The input power supply has a voltage range of 12-30 VDC. It is recommended that the power supply voltage be 15-24 VDC. When the 12V level is input, the power supply cannot be powered by 12VDC, and at least 15VDC or more. At 24 levels, the power supply needs to be powered by 24VDC. Current Requirement of the Power Supply: greater than 30MA Mounting Fixed: 4 x M3 screw holes Size: Approx. 4.7 x 4.5 x 1.7cm / 1.9 x 1.8 x 0.7in Package List: 1 x Voltage Frequency Converter Module Instructions for Use and Wiring: There is a silk screen mark on the top of the module. It can be wired according to the mark. The meaning of the mark is as follows: 0-10V: The analog voltage signal is input to the positive terminal. GND: Common ground, GND. 12-30V: Power input positive terminal. GND: power ground wire OC-OUT: signal collector output port (use this output port when equipped with a driver) FREQ-OUT: frequency output port (common frequency output port) Two independent outputs, OC-OUT is NPN and FREQ-OUT is IC output. The common cathode end is used with the negative GND of the power supply. When the common anode wiring is used with the power supply, when the common anode wiring is 13-24V, it is necessary to string a 2.7KR resistor. Common anode wiring, when 12V power supply, to string a 330R resistor. An example of the linear correspondence between voltage and frequency: 1V converted to 5KHz Convert 5V to 25KHz Convert 10V to 50KHz 1、The module can control the frequency generated according to the input voltage level 2、According to the level of the input voltage, the frequency of the output will also change in proportion to the relationship. 3、The power supply has anti-reverse function 4、The power indicator is on after power up 5、High quality material can make sure the durability of the product
  • Identifiant Fruugo: 414904211-876294454
  • EAN: 6951703441246

Livraison & retours

Expédition dans les 24 heures

  • STANDARD: 4.99 CHF - Livraison entre jeu. 02 octobre 2025–jeu. 09 octobre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Yanqirankeji-2
  • Yanqirankeji-2
  • 77-6 Xiangyin Road, Longgang Street, Unit 301A,Nanlian Community, Longgang District
  • shenzhen
  • China
  • 518100
  • a2Yanqirankeji@163.com
  • 18275928974

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Apex CE Specialists GmbH
  • Apex CE Specialists GmbH
  • Grafenberger Allee 277,40237 Dusseldorf, DE
  • Dusseldorf
  • Germany
  • 40237
  • info@apex-ce.com
  • 21312066043