M9N GPS Module for Pix32 6C Flight Controller A

69.00 CHF
+ 6.99 CHF Livraison

M9N GPS Module for Pix32 6C Flight Controller A

  • Marque: Unbranded

M9N GPS Module for Pix32 6C Flight Controller A

  • Marque: Unbranded
Prix de vente conseillé : 159.00 CHF
Prix : 69.00 CHF
Vous économisez : 90.00 CHF (56%)
Verkocht door:
69.00 CHF
+ 6.99 CHF Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

The M9N GPS uses a multi-constellation GNSS powered by M9N, a parallel GNSS receiver that can receive and track multiple GNSS systems.All four major GNSS constellations (GPS, , GLONASS and BeiDou) can be received simultaneously thanks to the multi-band front-end architecture.It also comes with an IST8310 compass, a tri-color LED indicator, a buzzer and a safety switch. There are 3 different connectors to choose from for different uses. The module has a baud rate of 115200 (previously 38400).It has an active circuit for the ceramic patch antenna, a rechargeable backup battery for hot start.The high-gain 25 x 25 mm2 patch antenna provides excellent performance, and the omnidirectional antenna radiation pattern increases the flexibility of device installation.GNSS Receiver:Ublox M9NNumber of Concurrent GNSS:Up to 4 GNSS,BeiDou,,GLONASS,GPS,QZSSFrequency Band:GPS L1, E1,GLONASS L1,BeiDou B1,SBAS L1,QZSS L1Compass:IST8310Output Protocol:UBX(),NMEAAccuracy:1.5m Nav. Update Rate:Up to 25 Hz (4 concerrent GNSS)GNSS Augmentation System:EGNOS, GAGAN, MSAS and WAAS,QZSS: L1SDefault Baud Rate:115200Input Voltage:4.7-5.2VPort Type:JST-GH-10PAntenna:25 x25 x4 mm ceramic patch antennaPower consumption:Less than 200mA @ 5VOperating Temperature:-40℃-80℃Cable Length:26cm (42cm cable purchase separately)Other:Tri-color LEDOnboard BuzzerSafety SwitchLNA MAX2659ELT+ AmpliferRechargeable capacitanceLow noise 3.3V regulatorDue to different batches, the printed words on the product be different, which does not affect use.Type:A:Regular EditionColour:BlackMaterial:ABSPackage Contents:1 * GPS Module1 * Carbon Fiber Stick2 * Bases1 Set * Mounting ScrewsOnly the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Identifiant Fruugo: 414740217-876036421
  • EAN: 4260582637650

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: 6.99 CHF - Livraison entre ven. 10 octobre 2025–ven. 17 octobre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Hongyun
  • Fangcheng County Shanqingshuixiu Forestry Technology Co., Ltd
  • No. 66, Nanshizhai, Zhaohe Town, Fangcheng County
  • Nanyang
  • CN
  • 473000
  • jinghoubaihuo-01@outlook.com
  • 13243142768

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 0034-682797075