New Pn532 Nfc Rfid Module V3 Kits Reader Writer Board For Android Phone

36.95 CHF
la livraison GRATUITE

New Pn532 Nfc Rfid Module V3 Kits Reader Writer Board For Android Phone

  • Marque: Unbranded

New Pn532 Nfc Rfid Module V3 Kits Reader Writer Board For Android Phone

  • Marque: Unbranded
Prix de vente conseillé : 74.00 CHF
Prix : 36.95 CHF
Vous économisez : 37.05 CHF (50%)
Verkocht door:
36.95 CHF
la livraison GRATUITE

En stock

Nous acceptons les modes de paiement suivants

Description

We've taken our popular PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The mini NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities, our library currently only supports reading/writing tags, and does not support phone-to-shield communication, tag emulation (which requires an external 'secure element' only available from for NXP) or other more advanced features at this for time. NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range Bluetooth-compatible that doesn'for t require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC.Because it can read and write tags, you can for always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other for NXP for MiFare type tags) The mini shield was designed by RF engineers using the best test equipment to create a layout and antenna with 5cm range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier. This shield is designed to use I2C or SPI communication protocols. SPI is the default, It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB. for any "classic" NG, Diecimilla, Duemilanove, UNO - as well as Mega R3 or later. For using the I2C interface with Mega R2 or earlier, two wires must be soldered as the I2C pins are in a different location on earlier Megas. Size: See the picture No retail package Quantity: 1Pc Note: Due to the difference between different monitors, the picture may not reflect the actual colorof the item.
  • Identifiant Fruugo: 251410679-544090438
  • EAN: 563854306716

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Avertissements de sécurité: Warning: Please read the product instructions carefully before use to ensure correct use.

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre mer. 08 octobre 2025–jeu. 16 octobre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Shenzhenshiantuwokejiyouxiangongsi
  • Shenzhenshiantuwokejiyouxiangongsi
  • Longhuaquminzhijiedaoxinniushequminzhidadaoniulanqiandashac1508
  • Shenzhen
  • China
  • 518083
  • antuwo18665307437@outlook.com
  • 8.62E+11
  • https://www.fruugo.co.uk/shenzhenshiantuwokejiyouxiangongsi/m-20620

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • None
  • JIANZHOU LIU
  • Mainzer Landstr.69
  • 60329 Frankfurt am Main
  • Hessen, Deutschland
  • Frankfurt am Main
  • DE
  • 60329
  • E-CrossStu@web.de
  • 4.97E+12
  • https://www.fruugo.co.uk/shenzhenshiantuwokejiyouxiangongsi/m-20620