Feature: 1. How it Works: This micro inverter converts DC power from solar panels directly into AC power to power appliances or office equipment and connects to the utility grid. The AC output of the micro inverter is synchronized and in phase with the utility grid. 2. Accurate Meter: This micro inverter has a built in highly accurate meter that allows you to see the working status of each component. Let your working experience be enhanced. 3. High Conversion Rate: The micro inverter has high conversion efficiency, with the highest conversion efficiency up to 92.5%, improving the efficiency of use. 4. Applicable Scenario: Commonly used in small solar systems. Micro inverter can achieve maximum power point tracking to maximize the overall output power. 5. Aluminum Alloy Material: The inverter needs to be connected to the grid to be used, small size, simple and convenient operation. The micro inverter is made of aluminum alloy, which is sturdy and can be used for a long time. Specification: Item Type: Solar Micro Inverter Material: Aluminum alloy Output Voltage Waveform: Sine waving Photovoltaic Output (DC) Number of Input Connectors: 1 set AC Output(AC) Single Phase Grid Type: 120V Rated AC Voltage: 120V AC Output Voltage Range: 120V AC, 80V-160V Rated AC Frequency: 50 or 60Hz Output Frequency Range: 50Hz 47.5-52.5Hz or 60Hz 57.5-62.5Hz Output Power Factor: >0.99 Efficiency Maximum Conversion Efficiency: 92.50% CEC Weighted Efficiency: 120VAC,90.5% MPPT Tracing Efficiency: 99.9% Night Time Loss: <700mW Temperature Range: -40℃ to 65℃ (ambient), -40℃ to +85℃ (storage) Proof Rating: IP55 Cooling Method: Nature cooling, no fan Guard: Islanding guard, voltage guard, frequency guard, temperature guard, current guard, etc. Comprehensive grounding: The PE terminal in the AC cable is the grounding wire of the equipment, no other grounding port.. Package List: 1 x Inverter1 x AC Cable1 x Instruction Manual Note: 1. Use only the solar panel to connect to this device. It cannot be used with batteries, so please use it with caution.2. This device is a micro inverter, for it to work properly, it must be properly connected to the grid and the grid is working properly, when the grid stops working, it will also stop generating electricity.3. The PV panel voltage should not exceed the maximum input voltage of the inverter.4. Do not exceed the maximum input power of the inverter for the PV panel power.5. The positive and negative terminals of the solar panel must not be connected backwards. If you extend the solar panel cable. You need to be careful about this issue.6. Avoid direct sunlight and direct rain when installing. (Ventilated, dry and cool)