Portable Spot Welder Digital Display Long Standby Time Built in Ammeter Short Circuit Protection Spot Welding Machine

84.00 CHF
+ 8.49 CHF Livraison

Portable Spot Welder Digital Display Long Standby Time Built in Ammeter Short Circuit Protection Spot Welding Machine

  • Marque: Unbranded
Verkocht door:

Portable Spot Welder Digital Display Long Standby Time Built in Ammeter Short Circuit Protection Spot Welding Machine

  • Marque: Unbranded

84.00 CHF

Économisez 85.00 CHF (50%)

Prix de vente recommandé

169.00 CHF
En stock
+ 8.49 CHF Livraison
Verkocht door:

84.00 CHF

Économisez 85.00 CHF (50%)

Prix de vente recommandé

169.00 CHF
En stock
+ 8.49 CHF Livraison

Nous acceptons les modes de paiement suivants

Description

Item Type: Portable Spot Welder Product Material: Aluminum Alloy Product Size: Approx. 11 x 8 x 3cm / 4.3 x 3.1 x 1.2in Built in Battery Model: 18650 Capacity: 5000mah Features: Weldable Nickel Plated Tape: Maximum weldable 0.2mm nickel plated tape, 0.25mm slotted nickel tape to assemble 18650 and other battery packs, recommended for long term use of 0.15mm Long Standby Time: The standby time can be up to 1 year when it is turned off, and the storage time can be up to 3 years. GEAR: gear adjustment, short press the white button to switch the mode, the arrowhead points to xxms, long press the black button to adjust the gear, divided into 30 gears DELAY: Delay adjustment, the adjustment method is the same as the gear BAT: battery power display, real time monitoring of battery voltage, low battery sound and power warning, automatic shutdown TEST: The actual output of the current value measured by the welding pen Short Circuit Protection: The machine is equipped with short circuit protection to monitor each weld x: Indicates short circuit protection Use scenario 1: power bank, toy car maintenance, because the power bank, toy car current is relatively small, generally between 1-3A, you can use 0.1 nickel tape spot welding. Adjust the parameters (GEAR=5ms DELAY=0.8S) to easily weld, the solder joints are very bright, not black, not oxidized, greatly increasing the service life Use Scenario 2: Pointed batteries are generally easier to obtain, but due to a concave position, ordinary spot welders can only be adjusted in five or six gears. If the pressure is too tight, it cannot be welded, and if it is too light, it will burn through. Use this welding machine to adjust the parameters (GEAR=7ms DELAY=0.8S) to properly increase the current output. Nickel strips are spot welded firmly in the grooves. Perfectly achieve maintenance goals. Use scenario 3: Power lithium battery, which can provide huge current. Power tools, electric vehicles all use it to assemble industrial 0.15mm or even 0.2mmn nickel strips. Just adjust the parameters (GEAR=30MS DELAY=1.2S)
  • Identifiant Fruugo: 321561519-713450173
  • EAN: 1121763861734

Livraison & retours

Expédition dans un délai de 3 jours

  • STANDARD: 8.49 CHF - Livraison entre jeu. 30 octobre 2025–jeu. 06 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • 91440300MA5HDL2A4K
  • SHEN ZHEN SHI LAI LI ZHU BAO SHI PIN MAO YI YOU XIAN GONG SI
  • Room B, 21F, Block A, Jingang Huating, 4009 Baoan Avenue, Yantian Community, Xixiang Street, Baoan District, Shenzhen
  • Shenzhen
  • CN
  • 518102
  • 939301410@qq.com
  • 15625700418

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • 950891051
  • MJCM SARL
  • 78 avenue des Champs Elysees Bureau 326, 75008 Paris, France
  • Paris
  • FR
  • 75008
  • mjcm190928@gmail.com
  • 0033 767213611