√ Pilot RF433Mhz. Easy to use No wiring required, complies with EU and French standards, simple setup steps. Easy remote control √ 16A High Power Experience the power of a variety of household appliances, safer to use. When power off turn on again, the device status is turned off by default. √ Stable signal, long control distance Powerful chip, signal can pass through walls, effective distance of indoor scenes can reach 30-60 meters, and effective distance of outdoor scenes can reach 150 meters. √ Supports flexible pairing No interference when using several in the same room. One socket can be stably paired with up to 30 wireless switches or one wireless switch can control 30 sockets at the same time. x One set of buttons controls one socket. x One set of buttons controls multiple sockets. √ Very strong resistance to falls This product has passed CE and FCC certification. √ Magnetic separation design The panel switch can be detached from the base and turned into a remote control, making it convenient for the elderly and children to use. The panel can be magnetically attached to the base or to a metal object, np. refrigerator door. The base can be attached to the wall with double-sided tape (included) or screws (included). √ Low power consumption, long service life The life of the panel switch key is 100 000 times. The switch is very energy efficient. Using 2 CR2016 batteries (included), they can be used more than 7000 times normally. Operating Voltage: AC 85V-245V Maximum current: 16A Maximum load: 3300 W RF Frequency: 433 MHz Operating temperature: -30-and80 Reception sensitivity: andgt; 97dbm Number of remote controls for storage: about 30 pieces Encoding: 1527 Tilted code RF Operation Mode: ASK Superheterodyne Wireless Reception Reception range: The open space is more than 150 meters Size: 50 x 50 x 80mm pilot Encoding: 1527 Tilted code Remote distance: up to 50 m (theoretical distance) Battery: 2pcs. CR2016 (included) Radio Frequency: 433 MHz Size: 60 x 30 x 13mm -Opinion: -Snap mode: "ON" button on the panel to turn on the device, then "OFF" button on the device to turn off. -Clear date: Press and hold until the light flashes several times, then release the weapon. success. -Configure -Snap Mode: 1. Press and hold the button until the light lights up and flashes once, then release the weapon. 2. Press the “ON” button on the remote once, the start light flashes and lights up 3. Then press the “OFF” button on the remote once. Success. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.