G1/2 Square Water Faucet Full Copper Single Cold Faucet Washing Machine Tap Hardware Fitttings Item Type: Faucet Material: Full Copper Weight: Approx. 218g/7.7oz Tap Size: Approx. 8 x 2.5cm/3.2 x 1in Surface Color: Black Spool Valve : Full Copper Spool Valve Forming Process: Gravity Casting Surface Craft: Black Paint Baking Process Scope of Application: Kitchen/Bathroom/Balcony, Etc. Color: Black Installation Steps: 1. Before installation, water must be drained to flush out the sediment and other debris in the pipeline; 2. Put the decorative cover into the angle valve inlet; 3. Wrap the PTFE tape on the threaded end of the corner break into the water, and screw into the embedded pipe by hand; 4. Use a screwdriver to insert the water outlet and rotate it clockwise until the angle valve is tightened, and the angle of the angle valve water outlet is adjusted; 5. Open the pipeline valve and check whether the threaded connection part is well sealed. If there is no water leakage, the installation is successful. Note: Do not use a wrench to force the installation to avoid damage to the product.