Introduction: Temperature and Pressure Safety Valves (T/P Valves)0.7 MPa = 102 PSIDetailed introduction:Temperature and pressure relief valves are suitable for use with various water heaters, including solar heaters, electric heaters, heat pumps, and boilers. The valve automatically releases excess temperature and pressure, providing dual safety protection. It serves as a critical safety component for pressurized water heating systems.Features:Safety relief valves are commonly used to control pressure in heating system boilers, domestic hot water storage tanks, and general water systems. When the system reaches the calibrated pressure, the valve opens to release pressure into the atmosphere, preventing dangerous overpressure conditions that could damage system components.Calibration pressure options: 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPaPressure deviation: 0.015 MPa for pressures up to 0.5 MPa; 3% of the rated pressure for pressures above 0.5 MPaTechnical specifications:Color: GoldMaterial:- Body: 3/4 inch brass- Control spindle: Brass- Sealing gasket: Silicone gel- Spring: SUS304 stainless steelNominal pressure: PN10Temperature range: 5110CSet pressure options: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPaSet pressure deviation: -10% to +5% of set pressureSet temperature: 99CInlet and outlet (middle): BSPP 3/4" x 3/4"Weight: 238gDimensions: 83 x 42mmPackage included:1 x Pressure Relief ValveNote: Light reflection and differences in display screens may cause slight variations between the color shown in the image and the actual product. Measurement error allowed is 13 cm.