Key Features: 1. Designed for the DJI RS 2/RSC 2 stabilizer. 2. Abundant mounting options for attaching a monitor, action camera and sound receiver, etc. 3. The monitor can be adjusted with a tilt angle of approximately 165 ° and can be stopped to any angle without tools. 4. Integrate 1/4''-20 threaded holes, double hot shoe cold. 5. Darts on each side of RS 2 & RSC 2 via NATO clamp to; Quick release with anti-removal stud. 6. The matte surface perfectly matches the industrial design of the stabilizer. SmallRig Monitor Mount with NATO Clamp for DJI RS 2/RSC 2 3026 Is designed to add accessories to both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc. The monitor stand can be installed on both sides of the stabilizer by a NATO clamp and has an anti-removal stud to protect your devices from dropping. There are two 1/4''-20 threaded holes on the top of the monitor stand, and one threaded hole. 1/4'' on the side of it, which can be attached with Magic Arm 2163 For action camera or other platforms. At the top and bottom there is a cold shoe holder that can be attached. with a sound receiver, microphone, light, etc. The monitor stand is adjustable to 165° and can be stopped to any angle. With its compact structure and consistent design to match your RS 2, it is perfectly matched with the stabilizer. SmallRig Monitor Mount with NATO Clamp for DJI RS 2/RSC 2 3026 Only for RS 2/RS C2; if you need to connect with Zhiyun and DJI stabilizer, please buy 2386 . Notice: Maximum payload 1.5kg Designer: Yetta White Compatibility: DJI RS 2, DJI RSC 2, Packing List 1 x Monitor Mount 1 x Wrench Allen Product dimensions: 134x42x52.5mm Package dimensions: 185x55x55mm Net weight: 113g Package weight: 161g Material: Aluminum alloy * Please note that the tax & import can be applied.