Features: Suitable for various vehicles like SUV, car, Truck and more. This product adopts a two-in-one design, which can place a mobile phone and a water cup at the same times. The matching mobile phone case is easy to install, plug and use, and can be removed at any-time when not in use. The cup holder can hold water cups with a diameter of less than 72mm, and the mobile phone case can hold a mobile phone with a width of less than 100mm. There are four elastic silicone sheets in the cup holder, which can hold most sizes of cups/bottles, so that the water cup will not shake when driving on bumpy road. Specifications: Material: ABS, PC Size: As Picture Shows The cup holder is suitable for the size below 72mm The mobile phone is suitable for the width of 48-100mm Note: Do not install in a position that affects driving. After drinking the water, please tighten the bottle caps to prevent the water from shaking out of the bottle during sudden brake. Installation Notes 1. Installed in the original car cup holder of the car; 2. Find a suitable cup holder, then adjust the base of the cup holder to a suitable position, put it into the original car cup holder, and then turn the cup holder to pop-out the fixed keys in the base until it is fixed; 3. If the original position of the cup holder is not suitable for installation, you can unscrew the screw in the cup holder, then adjust the screw hole position of the cup holder to the front, back or left and right, and then screw on the screw. Package includes: 1x Cup Holder