Pilot for DVB101 102 103 104 105 tuners original High quality pilot LTC, equipped with 4 programmable buttons. Only one pilot is needed for full service. The LTC tuner is convenient and easy to use. BUTTON PROGRAMMING Pilot has the ability to program 4 buttons: TV/AV, VOL-,VOL,POWER. To program the buttons, hold down the “SET” button for 3 seconds until the red light in the power button lights up with a continuous light. Briefly press the button to be programmed - the red light will flash. Point the remotes at each other and press the button whose function is to be copied to the remote. The light on the remote flashes, then lights up with continuous light. This means that pilot has adopted the function and is ready to program the next buttons. To program the next button, repeat the operation from point number 2. In order to complete the programming of the remote control buttons, press the “SET” button, the light will go out and the pilot will switch from learning mode to normal operation mode. EXCELLENT QUALITY The materials used in the production of this remote control are of the highest quality, which guarantees long and trouble-free operation of the device, the keys are bright and resistant to abrasion. Remote controls are usually sold without an instruction manual, the instruction manual of the remote control is always in the instruction manual of the equipment to which it is dedicated EASY TO USE No programming required - works right out of the box and battery mount - not included SAFE ECO-FRIENDLY PACKAGE QUALITY CONTROL