1、Wind pressure transmitter has high sensitivity, high accuracy and strong anti-overload capability. 2、Transmitter sensor and amplifier circuit are highly integrated with good performance. 3、The product has strong anti‑interference ability, long‑term stability and reliability. 4、Using unique stress isolation technology, accuracy temperature compensation and high stability amplification treatment. 5、The signal of the measured medium can be converted into a 4-20mA output signal. 1 x Wind Pressure Transmitter Item Type: Wind Pressure TransmitterMaterial: Aluminum alloyMeasuring Medium: Non-corrosive gasOverload Capacity: Single-ended minimum withstand voltage 4Kpa, maximum withstand voltage can not exceed 25 times the rangeMeasurement Accuracy: 0.2%FSOutput Signal: 4~20mAPower Supply: DC24VWire Length: Approx. 50cm / 19.7inPagoda Mouth Diameter: Approx. 8mm / 0.3inTemperature Drift: ± 0.1%FS/℃Ambient Temperature: -30℃~+80℃Environmental Humidity: ≤85%RHApplicable Environment: Widely used in pressure measurement in clean rooms, boilers, dust collectors, vacuum cleaners, power plants, air conditioners, etc.Size: Approx. 60mm / 2.4in51mm / 2in45mm / 1.8in20mm / 0.8in64mm / 2.5in4mm / 0.2in40mm / 1.6in35mm / 1.4in30mm / 1.2in10mm / 0.4in 1.5mm / 0.1in