TS78B Multi Functional Electronic Wall Metal Stud Finder Detector AC Wire Scanner Instrument

19.95 CHF
la livraison GRATUITE

TS78B Multi Functional Electronic Wall Metal Stud Finder Detector AC Wire Scanner Instrument

  • Marque: Unbranded
Verkocht door:

TS78B Multi Functional Electronic Wall Metal Stud Finder Detector AC Wire Scanner Instrument

  • Marque: Unbranded

19.95 CHF

Économisez 23.00 CHF (53%)

Prix de vente recommandé

42.95 CHF
En stock
la livraison GRATUITE
Verkocht door:

19.95 CHF

Économisez 23.00 CHF (53%)

Prix de vente recommandé

42.95 CHF
En stock
la livraison GRATUITE

Nous acceptons les modes de paiement suivants

Description

1、Designed by using principle that the density change of the substance below the surface of the detected object causes the detector frequency to change. 2、Wall metal finder, selected high-quality plastic materials, durable in use and wear-resistant. 3、Suitable for use in interior decoration structures, it can detect the position of metal and wood in the wall. 4、When detecting the location of metal or wood, the detector has an audible and flashing alarm. 5、Hand-held metal detector, small and light, simple and convenient operation, long service life. 6、Just put the detector on tested surface, light up red LED and green LED, and hear "beep" sound. When red LED goes out, the sampling is normal. If the first red LED and the "beep" sound continue to light, the sampling failed. Condition: 100% Brand New Item Type: Stud Detector Material: Plastic Power Supply: 1 x 9V 6F22 Battery (Battery Not Included) Weight: Approx. 95g / 3.4oz Detection Depth: Approx. 19mm / 0.7in Positioning Accuracy: Approx. 3mm / 0.1in Product Size: Approx. 145x62x25mm / 5.7x2.4x1.0in Operation Method: After sampling is normal, do not release the power button. Move along the measured surface. When STUD is detected, the red LEDs light up in sequence; when all the red LEDs light up and make a sound "beep", marking the first position, and then release the power button. Place the detector on the surface to be measured, resample and move from the opposite side to the position of the first marks. When STUD is detected, the red LEDs light up in sequence; when all the red LEDs light up and the sound "beep" sounds, marking the second position, and then release the power button. If the alarm repeats, repeat the test for a period of time. STUD may exist between the first and second marking positions. Move the detector away from the test object, move the knob until it emits sound and shines, and move back a little to stop the sound and gloss. The detector will not emit light or sound without metal or studs. Test for a while to get accurate results. 1 x Stud Detector (Battery Not Included) 1 x Manual
  • Identifiant Fruugo: 363940625-789533505
  • EAN: 605788723877

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité:
  • Not suitable for children under 36 months
  • Choking Hazard
  • Adult supervision recommended

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre mer. 29 octobre 2025–jeu. 06 novembre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Jinan Haoteseer Cross Border E-commerce Co.. Ltd.
  • Jinan Haoteseer Cross Border E-commerce Co.. Ltd.
  • Shounuo Chengshi Zhiguang East Tower, No. 9-43
  • Huaiyin District, Jinan
  • China
  • Jinan
  • CN
  • 250000
  • jnamei05@126.com
  • 13380966881

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • WongBo
  • NG HOT SARL
  • 99 bis avenue du Général Leclerc
  • 99 bis avenue du Général Leclerc
  • France
  • Paris
  • FR
  • 75014
  • ngnghot@outlook.com
  • 33695000695
  • https://www.captaincontrat.com/creer-son-entreprise/sarl/capital-social-de-sarl-montant-minimum-constitution-modification...tout-savoir